Booting from SD

Available to be read by all.
Sebastian_Monka
Posts: 10
Joined: Tue Nov 15, 2016 12:28 pm

Booting from SD

Postby Sebastian_Monka » Tue Dec 06, 2016 1:13 pm

2 weeks before I didn't had any problems with the boot of an Petalinux image. I formatted the SD card and copied the image back, but now it's not working. Fat32 is sufficient? Are there any known problems with the size of an SD Card?
Is it possible to see if the board is booting?
Thanks for your help!

Regards
Sebastian Monka

User avatar
Emilie_Wheatley
Posts: 71
Joined: Thu Jun 09, 2016 4:50 pm

Re: Booting from SD

Postby Emilie_Wheatley » Wed Dec 07, 2016 10:43 am

I'm personally using a 4GB micro SDHC grade 4 from Kingston formatted with 2 partition, Fat32 and 3Gb ext4, and it's working fine.
It will be useful to know what you can see on the serial output?

Regards,

Emilie

Sebastian_Monka
Posts: 10
Joined: Tue Nov 15, 2016 12:28 pm

Re: Booting from SD

Postby Sebastian_Monka » Wed Dec 07, 2016 11:20 am

Thank you for your reply Emilie!
There is nothing in Putty, only a black screen, because it's not possible to connect the board before it's booting.
The LEDs change in the booting process?
Maybe I should try JTAG.

Sebastian_Monka
Posts: 10
Joined: Tue Nov 15, 2016 12:28 pm

Re: Booting from SD

Postby Sebastian_Monka » Wed Dec 07, 2016 12:22 pm

Solved!
I don't know why, but when I changed the Jumpers JP7/JP8 to 1.8 Volt everything worked fine.
Thank you.

Regards,
Sebastian

User avatar
Emilie_Wheatley
Posts: 71
Joined: Thu Jun 09, 2016 4:50 pm

Re: Booting from SD

Postby Emilie_Wheatley » Wed Dec 07, 2016 1:05 pm

I'm glad it's working.

Regards,

Emilie


Return to “FAQ about Tulipp Development Platform”

Who is online

Users browsing this forum: No registered users and 1 guest