Support.Tulipp.eu

Dear Flemming, *You can see attach images of the boards which we have bought. One of them; it has not a jumper on it. **Also we couldnt see any codes or files at that link. Could you share us detail information and we want support for this. http://support.tulipp.eu/viewtopic.php?f=8&t=250 Best ...

All our documentation and software for the VCS-1 system (which conveys EMC2-DP + Zynq Z7030 or Zynq Ultrascale+ ZU3EG, ZU4CG, ZU4EV + FM191-RU, and soon FM192-RU too) is available in the following links: https://github.com/SundanceMultiprocessorTechnology/VCS-1 (Sundance repository) https://github.c...

Dear all, my company,ECHOES srl, bought the EMC2 equipped with TE0820 and we are having some troubles with the SATA controller on the PS of the ZynqUltrascale. These are the steps that I followed to configure the SATA controller on the TE0820: 1. I activated the SATA controller from vivado on the G...

Right, so at this point we know your Digilent pod works. We know the PL works, and the JTAG chain is not messed up when you program the PL through the Digilent pod. We also know that a standalone application boots successfully the PS and PL from SD card. Therefore, this problem is narrowed down to O...

Well, my guess seeing that a standalone application works like a charm, whereas programming with a debugger that is not the Xilinx one, is that something is messing the JTAG chain up. Why do I say this? Because the CPLD is related to the JTAG chain, and I don't think it's a coincidence that it works...

Hi, Right, I confused red with green LED. One of those funny bits of being color blind! The red LED is not from the FPGA, it seems it's at the PROGRAM signal of the CPLD onboard. The CPLD is basically there to monitor power goods, and manage some signals of the FPGA, related to JTAG, etc. It doesn't...

Is this TE0820-3EG-02 or TE0715-30-03? I think it's TE0715-30-03. If that's the case, you have the documentation online: https://wiki.trenz-electronic.de/display/PD/TE0715+TRM That LED is D3, and it's the main status LED. It determines if the FPGA has been programmed. (it goes off when it's programm...

Today we got some issues with the EMC2 Board. The Trenz module is blinking if we switch it on. I attached a video where you can see the blinking red led. It looks like a code. What do this mean? How we can test the board for functionality? We cannot programm the board trough JTAG or with the OLIMEX...

Attached the board files for EMC2-DP with TE0820 (REV02), TE0715-30 (REV 4) and FM191-RU. Copy them into <vivadoinstallationpath>/Xilinx/Vivado/2017.4/data/boards/board_files/ EMC2-DP+TE0820+TE0715-30+FM191.zip Attached the Repository where I have the SPI_US_Buffering IP and the SPI_rtl interface (t...

Does the Vivado project you've created for the platform build successfully, independently from SDSoC, generating a bitstream?